Do you want to become our Business ! Partner?

Mini Cart

Northvent A50-1 Pro

0.00

Heat recovery single-room units. Maximum air capacity up to 50 m³/h.

Description

USE
Arrangement of efficient energy-saving supply and exhaust single-room ventilation in flats, houses, cottages, social and commercial premises.Reducing heat losses caused by ventilation due to heat recovery. Humidity balance and regulated air exchange create individually controlled microclimate.Coordinated network based on several integrated single-room ventilation units with central control.
DESIGN
expert a50-1 pro design
Easy maintenance.
Indoor unit is opened by
pressing the latches on
both sides.
One of the best regeneration
efficiency on the market due to
innovative hexagonal structure of
the heat exchanger cells.
Integrated automatic air
shutters prevent air back
drafting.
The specially designed
front panel can be closed manually
to ensure 100 % air tightness and
protect against wind impact.
UNIT OPERATING LOGIC IN WINTER PERIOD
Warm stale air is extracted from the premise, flows through the ceramic regenerator and transfers its heat energy and moisture to it.As the ceramic regenerator gets warmed up, the unit switches to the supply mode. Clean cold intake air flows through the regenerator and absorbs accumulated heat and humidity.When the ceramic regenerator is cooled down, the unit switches to the extract air mode.
CONTROL
Control of the unit operation mode is performed by means of sensor control panel located on the unit casing or a remote controller.
The unit is equipped with a humidity sensor for indoor humidity control.
Connection of the units in series ensures balanced ventilation. First unit in the chain becomes the master one.
Ventilation mode of the entire system can be controlled by means of the control panel on the master unit.
A signal from the remote control is received by the master unit only.
MOUNTING
The unit is designed for through-the-wall installation inside a prepared hole in an outer wall of the building.The best ventilation solution is pairwise installation of reverse phase connected units. Some units ensure supply of fresh air to the room and the other units extract air from the premise. This way the most efficient balanced ventilation is arranged. In case of brand new construction, units are mounted in two stages:

  • Pre-installation at the stage of the indoor finishing and outer decorative wall finishing. It includes installation of an air duct, an outer ventilation hood and cable installation;
  • Final mounting before commissioning of a house. It includes installation of a regenerator with a fan and filters and mounting and wiring of an indoor unit with a controller and shutters.

Characteristics

Parameter Expert A50-1 Pro (1 speed) Expert A50-1 Pro (2 speed) Expert A50-1 Pro (3 speed) Measurement unit
Voltage 100-230 100-230 100-230 V
Frequency 50/60 50/60 50/60 Hz
Power 3.61 4.15 5.20 W
Current 0.025 0.03 0.039 A
RPM 800 1300 1900 min-1
Air flow in ventilation mode 4 8 14 l/s
Air flow in ventilation mode 15 30 50 m³/h
Air flow in heat recovery mode 2 4 7 l/s
Air flow in heat recovery mode 8 15 25 m³/h
Sound pressure level at 1 m 20 27 30 dBА
Sound pressure level at 3 m 11 18 21 dBА
Temperature of transported air -20…+50 -20…+50 -20…+50 °С
Ingress protection rating IP24 IP24 IP24
Filter G3 (F8 PM2.5 > 99 %) G3 (F8 PM2.5 > 99 %) G3 (F8 PM2.5 > 99 %)
Regeneration efficiency in accordance with DIBt LÜ-A 20 ≤ 93 ≤ 93 ≤ 93 %
Outdoor sound pressure attenuation in accordance with DIN EN 20140 42 42 42 dBА
SEC class A A A
Mounting wall mounting wall mounting wall mounting

Dimensions

expert a50-1 pro overall dimensions

Reviews

There are no reviews yet.

Be the first to review “Northvent A50-1 Pro”

Your email address will not be published. Required fields are marked *

website design in uk